# -*- coding: cp1253 -*-
import serial                                                              #Serial imported for Serial communication
import time                                                                #Required to use delay functions   
ArduinoUnoSerial = serial.Serial('com12',9600)       #Create Serial port object called ArduinoUnoSerialData time.sleep(2)                                                             #wait for 2 secounds for the communication to get established
print ArduinoUnoSerial.readline()                             #read the serial data and print it as line 
print ("Έχεις νέο μήνυμα από το ArduinoYou have new message from Arduino")
while 1:         #Do this forever
                 var = raw_input()                                          #get input from user             
                 if (var == '1'):                                                #if the value is 1         
                  ArduinoUnoSerial.write('1')                      #send 1 to the arduino's Data code       
                  print ("LED turned ON")         
                  time.sleep(1)          
                 if (var == '0'): #if the value is 0         
                  ArduinoUnoSerial.write('0')            #send 0 to the arduino's Data code    
                  print ("LED turned OFF")         
                  time.sleep(1)
                 if (var == 'fine and you'): #if the answer is (fine and you)        
                  ArduinoUnoSerial.write('0') #send 0    to the arduino's Data code    
                  print ("I'm fine too,Are you Ready to !!!")         
                  print ("Type 1 to turn ON LED and 0 to turn OFF LED")         
                  time.sleep(1)
                 if (var == 'exit'):
                  quit()